FAQ
Everything you need to know about Aufmaster.
Here you will find answers about the measuring device, the App and the Cloud.
Frequently asked questions about cable measurement
01 What is a takeoff of cables and wires, and what role does it play in the electrical trade?
A takeoff records the dimensions and quantities of an object or structure. That way you know exactly what is actually there. It's the basis for all further planning and calculation.
In the electrical trade, a takeoff covers electrical installations and equipment. Wires, cables, switches, distribution boards, switch boxes and other components are measured and documented. Afterwards you know exactly how long the cables are, where switches and distribution boards sit, how many sockets there are and much more.
This is what you need a takeoff for in the electrical trade:
- Planning: An accurate takeoff gives you detailed plans. They are the basis for planning new installations or renovations.
- Calculation: With the takeoff, you work out how much material you need, such as cables, switches and sockets. That lets you estimate costs accurately.
- Documentation: The takeoff records exactly which electrical installations are in place. That helps later for reference, maintenance or changes.
- Safety and compliance: With the takeoff, you check whether the electrical installations meet the applicable safety standards and regulations.
Takeoffs are usually done by qualified electricians, electrical engineers or electrical installers. They have the know-how and experience in electrical installation work.
02 What role does the takeoff play in invoicing?
An important one, especially when costing construction projects. Once you have accurate dimensions and quantities of the electrical installations, you can calculate the costs of material and labor from them.
With the takeoff data, your invoicing team creates accurate cost estimates. The cable lengths and the number of switches, sockets and other components give you the amount of material needed. With current material prices and hourly rates, you then calculate the total cost of the electrical installation.
The takeoff also helps when you check invoices and bill for work done. Compare the work actually carried out on site with the takeoff data, and discrepancies stand out. That way you invoice accurately, and every job done is recorded and paid for correctly.
In short: in the electrical trade, the takeoff matters for more than planning and documentation. It has a direct impact on costing and invoicing construction projects. It lets you estimate costs accurately, check the work done and write correct invoices.
03 What are the benefits of a takeoff app?
A takeoff app saves you time as an electrician and prevents errors. The main benefits at a glance:
- Saves time: You record your takeoff data quickly in the app. Instead of writing down measurements and cable runs by hand and drawing sketches, you enter dimensions directly or capture them right away with the Aufmaster AM1 cable length measuring device. That saves time and avoids typing errors.
- Accuracy: You capture accurate readings right on site. The app works with precise measuring devices like the Aufmaster AM1 cable length measuring device. The result: more accurate figures and fewer problems later in the project.
- Data organization: You save and sort items, recorded dimensions, notes and photos right in the app. So you quickly find what you need throughout the project.
- Calculation and costs: Many takeoff apps calculate material quantities and costs from the recorded data, for example with stored price lists. That helps you with quotes and invoicing.
- Communication and collaboration: You, the project management and everyone else involved stay aligned more easily. You share the recorded data as a PDF, as a file or via a cloud such as the Aufmaster Cloud. So everyone is on the same page, and there are fewer misunderstandings.
- Add changes later: You can change or add to recorded data at any time. If project requirements change or more measurements come in, you update the data right away and adjust the planning.
In short: with a takeoff app, you work faster, more accurately and better coordinated as an electrician. It supports your installation projects from planning to invoicing.
Combine our free takeoff app with the Aufmaster AM1 cable length measuring device, and you'll get the most out of every job site.
04 What makes a very good takeoff app?
A very good takeoff app is easy to use, works with measuring devices and also works without internet. Here's what matters in detail:
- Easy to use: A good takeoff app is quick to learn and available in several languages. Navigating, entering data and opening functions works without detours.
- Connection to measuring devices: A good takeoff app works with measuring devices, such as the Aufmaster AM1 cable length measuring device. That way you capture accurate readings on site.
- Flexibility: A good takeoff app adapts to your projects, not the other way around. You create your own lists, items or templates and record exactly the measurements and details you need as an electrician.
- Organized data: You save and sort takeoff data, add comments, photos and notes, and find everything again later with the search.
- Data exchange: A good takeoff app connects with other programs. You export data in various formats, share it with colleagues or transfer it to other programs such as the Aufmaster Cloud.
- Offline work: You can measure even without an internet connection. The app syncs the data as soon as a connection is back.
- Security and data protection: A trustworthy takeoff app protects the data it records. It keeps confidential information secure and complies with data protection regulations.
- Support and updates: A good takeoff app gets improved regularly. Updates fix bugs and add new features. If you have questions or problems, a support team you can actually reach helps you out.
If a takeoff app covers these points, electricians can record, manage and use their takeoff data reliably.
05 How do I choose the right device for the takeoff app?
Which device fits depends on your preferences, your requirements and the app's operating system. Price plays a role too: Android devices (Huawei, Samsung, Oukitel and others) are often much cheaper than iOS devices (Apple).
These devices work well for a takeoff app on the construction site:
- Smartphone: The practical choice for many electricians on site. Most smartphones are handy, powerful, well connected and easy to use. There is a wide choice of takeoff apps for both Android and iOS. Make sure the smartphone has enough storage, a good camera and a battery that lasts, so your takeoff app runs well. Protection matters too: a rugged case or a device that comes ruggedized from the factory.
- Tablet: The larger screen helps with plans, sketches and detailed takeoff data. The battery usually lasts longer than on a smartphone, too. Some takeoff apps are made specifically for tablets. If you often capture a lot of takeoff data on site or look at detailed plans, a tablet is a good choice.
- Laptop or notebook: Useful if you process a lot of data or need detailed calculations. The larger keyboard and display make it easier to enter and review data. On the other hand, a laptop is less mobile on site than a smartphone or tablet.
In the end, what counts is what you need on your sites. The device has to match the app and handle the often harsh environment. So check the system requirements of your takeoff app beforehand to make sure the device is compatible.
We are happy to help you choose the right devices for your construction sites.
06 Which cable types can the Aufmaster measure?
The Aufmaster measures more than just NYM-J 3x1.5 mm². It measures any cable, as long as it is metallically conductive. Flexible cables, rigid wires or special cable types: the Aufmaster measures quickly and reliably. That makes it the tool for anyone who regularly works with different cable types and measures and documents on the construction site or in the warehouse.
07 How do I reliably measure and document NYM-J 3x1.5 mm² with Aufmaster?
With Aufmaster, you measure and document NYM-J 3x1.5 mm² reliably. Cut detection and automatic documentation replace measuring and writing things down by hand. That saves time on the construction site, and you can rely on the data. You can find the cables you need and our Aufmaster AM1 cable length measuring device at your electrical wholesaler.
08 What are the advantages of automated documentation of electrical cables on the construction site?
Automatic documentation by the Aufmaster saves time and means fewer mistakes. Nobody has to write things down by hand anymore. All the data you need for invoicing is captured quickly and reliably. That pays off especially on large construction sites.
09 How does Aufmaster's cut detection work when laying NYM-J 3x1.5 mm²?
Aufmaster's cut detection automatically recognizes the cable sections you use. That way, everything is documented quickly and reliably. This helps most on large construction sites, where many cables are laid and the material has to be recorded accurately. You can find the cables and equipment you need at your electrical wholesaler.
10 How does Aufmaster make electrical installation on construction sites more efficient?
Aufmaster measures and documents reliably. Automatic documentation and cut detection save work and prevent mistakes. Installation goes faster and more accurately, with less rework. You can get the tools and cables you need from your electrical wholesaler.
11 What are the main differences between NYM and NYY cables?
NYM cables are made for fixed installation in buildings, in dry, damp and wet rooms. They do not belong in the ground or unprotected outdoors. They have PVC insulation and a PVC sheath. NYY cables are tougher and built for laying in the ground and outdoors. Their insulation is thicker and their sheath stronger, so they stand up to mechanical stress and the weather. You can usually get both at your local electrical wholesaler.
12 What factors should you consider when choosing an electrical cable?
These points matter most:
- Intended use: Is the cable going indoors, outdoors or into the ground?
- Electrical load capacity: How much current does the cable have to carry?
- Mechanical load: Will pressure or tensile forces act on the cable?
- Ambient temperature: In what temperature range will the cable be used?
- Standards and regulations: Does the cable meet all relevant legal requirements and standards (e.g., VDE, IEC)?
The experts at your electrical wholesaler are happy to explain these points and help you find the right cable for your project.
13 What are the advantages of H07RN-F cables compared to other cable types?
H07RN-F cables are very robust and flexible. They resist oil and mechanical stress. That makes them a good fit for mobile applications in industry and on construction sites. By comparison, NYM cables are less flexible and mainly intended for fixed installation in buildings. You can get both cable types at your electrical wholesaler, where experts help you choose.
14 When should you use an underground cable (NYY)?
Whenever you lay a cable in the ground. Underground cables such as NYY are built to withstand mechanical stress and moisture. That makes them suitable for supplying power to outdoor facilities and buildings. Your electrical wholesaler can tell you more about specific underground cables.
15 Why does the cable cross-section matter when choosing electrical cables?
The cross-section determines how much current a cable can carry and how much voltage drops along it. The larger the cross-section, the higher the current-carrying capacity and the lower the voltage drop. For standard installations in residential buildings, NYM-J 3x1.5 mm² is common. It is enough for most lighting and socket circuits. Your electrical wholesaler can help you choose the right cross-section for your requirements.
By the way: the Aufmaster measures any cable with at least two metallically conductive cores and a cross-section of 0.25 mm² or more. It comes with alligator clips and test probes. Older Aufmasters still had WAGO through connectors up to 4 mm².
16 What is the difference between an installation cable (NYM) and a rubber cable (H07RN-F)?
Installation cables such as NYM are meant for fixed installation in buildings and have PVC insulation. They are not suitable for mobile applications. Rubber cables such as H07RN-F are flexible and made for mobile and temporary installations. Their rubber insulation stands up to mechanical stress and oil. You can get both cable types at your electrical wholesaler.
17 What standards and regulations apply to the installation of electrical cables?
In Germany, for example, the VDE regulations apply. They make sure cables are installed and operated safely. Internationally, the IEC standards set similar safety requirements. Your electrical wholesaler can advise you in detail and has the right products that meet these standards.
Important: only measure with the Aufmaster when the cable is completely de-energized. You can find more safety information in our operating instructions in the help section.
18 How does the ambient temperature influence the choice of the right electrical cable?
The ambient temperature affects the insulation and the service life of a cable. That is why every cable has to be rated for the temperatures it operates in. NYM-J 3x1.5 mm², for example, can be used from -40 °C to +70 °C when installed in a fixed position. Your electrical wholesaler has cables for different temperature ranges.
If needed, the Aufmaster also documents the ambient temperature where you work with the cable.
19 What protective measures are necessary when laying cables outdoors?
Cables outdoors need mechanical protection, for example protective conduits or cable ducts. They should also be UV-resistant so the sun does not damage them. NYY cables are a good fit. You can get them at your electrical wholesaler.
The Aufmaster has degree of protection IP54. That means it is protected against dust and splashing water.
20 What is the standard cable for house wiring and why is it used?
The standard cable for house wiring is NYM-J 3x1.5 mm². Its cross-section is enough for most lighting and socket circuits in residential buildings. It is easy to lay and flexible enough for most installations. It is widely used, and every electrical wholesaler has it.
We can confirm that: NYM-J 3x1.5 mm² also tops the Aufmaster ranking of the most commonly installed cables.
21 Which safety regulations apply to NYM-J 3x1.5 mm²?
For NYM-J 3x1.5 mm², the VDE standards and other safety regulations apply. That means: install it correctly, protect it from mechanical damage and stay within the permissible load. That way, the installation runs safely and lasts. Your electrical wholesaler can advise you and has the right products.
Everything you need to know about the device.
01 How can I measure the cable length?
You measure the length of a cable with a cable length measuring device. There are several types, and they determine the length in different ways. A mechanical device counts the revolutions while the cable runs through it. An electronic or digital device picks up electrical or optical signals, calculates the length from them and shows it on a display. Which method fits depends on things like the type of cable and the accuracy you need.
You can also measure or calculate cable lengths in other ways: with a folding ruler, with a calculation (diameter of the cable coil * pi (π) * number of turns) or by weighing the cable.
With the Aufmaster AM1 cable length measuring device and the Aufmaster App, you measure cable lengths without much effort.
02 What is a cable length measuring device?
A cable length measuring device measures the length of cables and wires. It shows you how long a cable is without unrolling it and measuring by hand. It is used in electrical engineering, telecommunications, network installation and home wiring, for example. Basically anywhere the length and condition of cables need to be checked.
03 What is a cable length measuring device used for?
With a cable length measuring device, you find out the length of cables and wires without unwinding them or measuring by hand. Devices that use the reflection method also locate faults such as short circuits or breaks and show how far away they are. That saves time in the warehouse, in goods receiving and on the construction site.
The Aufmaster AM1 cable length measuring device measures the length and logs cable cuts directly in the free Aufmaster App. No more pen and paper on the construction site or in the warehouse.
04 Electronic, digital or mechanical cable length measuring device: what is the difference?
The main difference is how the device measures and how it shows the reading. Electronic and digital mean the same thing here. Mechanical devices work differently.
A mechanical cable length measuring device guides the cable over rollers or wheels. You pull the cable through the device by hand, the rollers or wheels count the revolutions, and that gives you the length. The reading is usually shown on an analog scale or a counter.
An electronic or digital cable length measuring device, on the other hand, measures with electronic sensors. It picks up electrical or optical signals that pass through the cable or are reflected by it, and calculates the length from them. The result appears on a digital display. Some devices do more, such as storing measurement data or calculating averages. The Aufmaster AM1 cable length measuring device logs every reading in the Aufmaster App.
The main advantage of electronic or digital cable length measuring devices is their accuracy. They often also offer features for analyzing and managing measurement data. Mechanical cable length measuring devices are usually simpler and cheaper, but less accurate, and often have fewer features.
Which device fits depends on your requirements: the accuracy you need, your budget and the features you want.
05 Are there cable length measuring devices for different purposes and applications?
Yes. Many manufacturers build cable length measuring devices for different purposes and applications. Some devices are designed specifically for coaxial cables, Ethernet cables or power lines, for example. Functions and features vary by manufacturer and model.
The Aufmaster AM1 cable length measuring device can measure virtually any cable with at least two conductors, starting from a cross-section of 0.25 mm².
06 What are the measuring principles of electronic cable length measuring devices?
The best-known measuring principles of cable length measuring devices are the capacitive method and the reflection method.
The capacitive method measures the capacitance between two conductors of the cable, that is, between two cores or between a core and the shield. Depending on its construction, insulation and cross-section, every cable type has a specific capacitance per meter. The manufacturer states this value, or you determine it by calibrating on a piece of known length. You connect the measuring device at one end. The other end stays open. The measured total capacitance divided by the capacitance per meter gives you the length. So the method needs at least two conductors and the right cable data. With those, it measures quickly and accurately.
The reflection method (pulse echo method, also known as time domain reflectometry or TDR) injects a short electrical pulse at one end. Wherever the characteristic impedance of the cable changes, for example at the open end, at a short circuit, a break or a joint, part of the pulse is reflected and travels back. From the travel time and the propagation speed in the cable, the device calculates the distance to that point. That makes the method especially good for locating faults. For an accurate length, the propagation speed of the cable type must be known. With very long cables or strong attenuation, the reflection gets weaker and the measurement less accurate.
07 What is the role of the velocity factor in a cable length measuring device?
With the reflection method, the measuring device needs the velocity factor to determine the length accurately. It describes how fast electromagnetic waves travel in a cable, relative to the speed of light. The speed of light is about 299,792 kilometers per second. The velocity factor lets you calculate how fast the signals actually travel in the cable. A velocity factor of 1 or 100 percent means the electromagnetic waves travel through the cable at the speed of light.
With a velocity factor of 0.80, for example, the electromagnetic waves travel through the cable at 0.80 * 299,792 kilometers per second, which is 239,834 kilometers per second. If you take the actual propagation speed of the signals into account, you measure more accurately. The velocity factor depends on the cable type. The manufacturer states it, or it is determined by measurement.
08 What can I measure with the Aufmaster?
Any cable with at least two metallic conductors and a cross-section from 0.25 mm² (up to 16 mm² for cut detection). Fiber optic cable won't work.
09 What IP rating does the Aufmaster have?
Degree of protection IP54. That means: dust-protected and fully protected against contact, plus protected against splashing water from all sides.
10 How many cores do I need for a measurement result?
The Aufmaster always connects to two cores of the cable. So it does not measure single-core cables.
11 Which cross-sections can I connect?
From 0.25 mm², and up to 16 mm² for cut detection. The clips that come with the Aufmaster fit cross-sections up to 70 mm². You can swap them for the test probes, also included, at any time.
12 Can the Aufmaster measure cable length when a device is connected?
Yes, as long as the cable end is not short-circuited.
The Aufmaster AM1 detects a short circuit automatically and reports it in the app. Important: only measure cables that are de-energized.
13 How does the Aufmaster know the characteristics of the connected cable?
From the Aufmaster cable database. It's large and grows regularly. So chances are good that you just connect the Aufmaster to the cable, pick the cable in the Aufmaster App by scanning it or searching for the item, and get started.
14 What about cables that are not yet in the Aufmaster cable database?
You add them yourself in the Aufmaster App. Then you calibrate the new cable type with a reference piece at least 20 m (65 ft) long. After that, you use it in the Aufmaster App like any other cable type.
15 How long does the battery last and how long does it take to charge?
The Aufmaster battery lasts up to two weeks on the job site. A full charge takes 2 hours.
16 Can the battery be replaced?
No. The battery is fully sealed in potting compound so the device meets degree of protection IP54.
17 Can I change the clamps?
Yes. The current Aufmaster AM1 comes with alligator clips for cross-sections up to 70 mm² and with test probes. You can swap one for the other at any time, or use clamps of your choice. Older devices came with WAGO through connectors up to 4 mm², and you can replace those at any time, too. Just do not extend the connecting cable on the Aufmaster more than necessary.
18 Is the Aufmaster certified for legal metrology?
No. The Aufmaster is not certified for legal metrology.
19 What are the eight colors for?
So you can tell your devices apart when several Aufmasters are in use at the same time. You recognize each device by its color, on the construction site and in the Aufmaster App.
20 How is the Aufmaster connected to the smartphone or tablet?
Via Bluetooth. You pair the Aufmaster with your smartphone or tablet, Android or iOS.
21 Can I use multiple Aufmasters at the same time with my smartphone?
Yes. How many Bluetooth devices can be connected at once is set by the smartphone manufacturer and varies from device to device. The Aufmaster App itself has no fixed limit. We do recommend running no more than 5 to 8 Aufmasters at a time, so your smartphone or tablet isn't overloaded.
22 Do I have to stay close by with my smartphone?
Yes, your smartphone should stay within Bluetooth range. The Aufmaster and your smartphone or tablet are connected via Bluetooth Low Energy. Outdoors, the connection stays stable within a radius of at least 35 m. Indoors, the range is 15 to 30 m. Walls, metal shelves or machines can reduce it.
If the connection drops, the Aufmaster AM1 stores all measurement data internally for up to 10 minutes and sends it as soon as your smartphone is connected again.
23 Does the Aufmaster track my GPS position?
No. The Aufmaster has no GPS module. The Aufmaster App saves the location of a cable drum only once: when you put the drum into use. It uses the GPS data from your smartphone for this, and only if you have given the app permission.
24 Does the Aufmaster work without an app?
No. The Aufmaster always works together with the Aufmaster App. The app is free for Android and iOS.
25 Where and how do I connect the Aufmaster?
For cut detection, connect the Aufmaster to the inner end of the cable drum or coil. Strip a short piece of insulation and attach the Aufmaster's clips to two bare cores. Polarity doesn't matter. For a length measurement, the side doesn't matter either: you can also connect the Aufmaster to the end you normally pull the cable from. Important: measure only on de-energized cables.
26 Do I need an Aufmaster for each drum?
Only if you pull cable from several drums at the same time. Otherwise, move the Aufmaster to the next drum when you're done, set it up and keep working. This applies to both length measurement and cut detection.
27 Do I have to measure every cable myself, and what about cables that are not in the database?
No. Only cables that are not yet in our cable database need to be measured once with a reference piece of ≥ 20 meters. The Aufmaster App does this in a few seconds. After that, you can select them in the cable database.
28 Do Aufmaster and the app work without internet on the construction site?
Yes. All the cable data you need for length and cut detection is stored on your smartphone or tablet.
If you use the Aufmaster Cloud, the app transfers your measurement reports to the cloud as soon as you are back online. For this, you need to have signed in once beforehand with an internet connection.
29 Is the software available in several languages?
Yes. The software and operating instructions are currently available in German, English, French and Spanish.
Frequently asked questions about pricing
01 Where do I book a plan?
You book plans directly in the Aufmaster Cloud. Create your free company account there, test all features for 14 days, then choose the plan that fits.
02 What happens to existing Aufmaster Cloud accounts?
Existing accounts keep their current features, free of charge and for good. You can add new features or add-ons whenever you need them. You decide what you want to use.
03 Is there a free trial?
Yes. From the day you register, you can test all features free for 14 days, with no payment details needed. Then you choose a plan. If you don't, your company account continues on the free Starter Package.
04 How does billing work?
You choose between monthly or yearly billing and a term of 12, 24 or 36 months. The longer the term, the lower the monthly price. Paying annually saves you extra. You pay by credit card, PayPal or SEPA Direct Debit.
05 Can I switch plans later?
Yes. You can upgrade at any time. We prorate the change to the day, and the new features are available right away. You can move to a smaller plan at the end of the current term.
06 What about several devices or colleagues?
Every plan includes as many colleagues as you need. You add them to your company account for free and assign roles. For each additional Aufmaster device you need a separate software subscription. You simply add it to your company account.
07 Can I cancel anytime?
You can cancel at the end of the term you chose. During the term, the contract is binding. That is why longer terms come with discounts. After you cancel, your data stays in your company account. Only the features of your booked plan (Warehouse Package or All-In Package) stop working. Your company account continues on the Starter Package.
08 Do I get a cloud in the free version?
No. The free Starter Package does not include cloud storage. In the Aufmaster Cloud, you only manage your profile. Nothing more. To create and sync articles, projects and measurement reports in the cloud, you need the Warehouse or All-In Package.
Frequently asked questions about returns
01 Can I return the Aufmaster?
Yes, you can return measuring devices within 14 days. Please let us know by email first: support@aufmaster.com.
02 Are returns free of charge?
No. You pay the shipping costs for all returns to us. We don't provide a return label.
03 Where do I send my return?
Please send all returns to this address: Aufmaster GmbH, Grüneburgweg 106, D-60323 Frankfurt am Main.
04 How long will it take to receive my refund?
We refund you as soon as your return has arrived and we have checked it.
Within 14 days, the amount goes back to the payment method you used for the purchase.
Frequently asked questions about payment & shipping
01 Do you ship outside Germany?
Yes, we ship within the EU. The buyer pays for deliveries outside Germany.
You will find the costs in the respective offer.
02 How much does shipping cost?
Shipping within Germany is free.
For other EU countries, the shipping costs in your offer apply. If the offer doesn't list any, we currently charge €35 per shipment.
If one of our sales partners ships your order, shipping costs may differ. They depend on that partner's terms, and you see them before you buy.
03 When will my order arrive?
Within Germany, your order usually arrives 2 to 3 business days (Monday to Saturday) after it ships. We ship as soon as your payment is in. In the weeks before Christmas or around public holidays, it can take a little longer.
04 What payment options do I have?
You can pay by credit card (Visa, Mastercard, American Express), PayPal, Apple Pay, Google Pay or SEPA Direct Debit. Payments are processed securely by Stripe.
Bank transfer is also possible. Just get in touch via our contact form.
You decide what suits you best.